Portable Standing Seam Roll Former, model PSR 005
Portable standing seam roll former, model PSR 005, hereinafter referred to as Equipment, is intended for roll forming standing seam profiles using galvanized steel including polymer coating, copper, aluminum, zinc-titanium (Fig.1).
Fig. 1 General view of the equipment
Raw material requirements:
- mass of zinc coating 100…275 g/m2;
- yield strength 280…320 N/mm2;
- coil width – 14.9″ (379 mm) … 26.9″ (684 mm);
- coil thickness – 0.45 mm…0.60 mm;
- copper and zinc-titanium thickness – 0.7…0.8 mm
- Roll forming speed: up to 12 m/min.
- Installed power capacity – 2х0.75 kW
- Power supply voltage at frequency of 60 Hz, 115/208-230 V
- Temperature operating mode of the equipment +35°– 10 °С
- Overall dimensions of the equipment in set with transverse knife and embossing roller dies (LxWxH), approximately 1850х1224х1102 mm.
- Total weight of the equipment in set with transverse knife and embossing roller dies is 382 kg.
- Adjustment of the equipment to the required width of the profile is performed by manually moving the profiling units relative to the marked center.
- In transport position equipment is disassembled into seven parts: frame, two profiling units, 2 motor reducers for each of profiling units, transverse knife and embossing roller dies.
- Required operating personnel: 4 persons.
- Uncoiler «Liner»
- Portable Standing Seam Roll Former, model PSR 005
- Transverse knife
- Embossing roller dies
- Roller base receiving table
|1.1||Lifting capacity||180 kg|
|1.2||Overall dimensions (LxWxH), mm||520х1080х400|
|2||Portable Standing Seam Roll Former, model PSR 005|
|2.1||Quantity of roll-forming stations||6|
|2.2||Profiling rolls material||Instrument steel with heat treatment|
|2.3||Product width readjustment||manual|
|2.4||Control box||hardware base Lenze (Germany)|
|2.5||Overall dimensions of the equipment (LxWxH), approximately in mm||1560х1370х1050|
|2.5.1||Left profiling unit||1410х450х370|
|2.5.2||Right profiling unit||1410х450х370|
|2.6||Weight of the equipment, approximately kg||295|
|2.6.1||Left profiling unit||100|
|2.6.2||Right profiling unit||90|
|3.1||Overall dimensions (LxWxH), mm||475х1110х575|
|4||Embossing roller dies||Yes|
|4.1||Overall dimensions (LxWxH), approximately in mm||868х300х100|
|4.2||Weight, no more than||17|
|5||Roller base receiving table|
|5.1||Dimensions (LxWxH), no more than||490х455х865 mm|
|5.2||Weight, no more than||15 kg/pcs.|
|1||Portable standing seam roll former, model PSR-005, consist of:||1||Set|
|1.2||Portable standing seam roll former, model PSR 005||1||pcs|
|1.4||Embossing roller dies||1||pcs|
|1.5||Roller base receiving table||4||pcs|
|1||Left profiling unit (for profile with height 1½”-38.1 mm), 1 pcs.|
|2||Right profiling unit (for profile with height 1½”-38.1 mm), 1 pcs.|
1. Delivery time: within 2.0 – 2.5 months
2. Terms of delivery:
DDP Toronto: 103 St Regis Crescent S, North York, ON M3J 1Y6, Canada.
3. Payment terms:
– 50% within 5 (five) business days after signing the contract
– 30% within 2 (two) months from the date of the first advance payment
– 20% within 3 (three) banking days after notification of the equipment readiness for shipment
* Payment terms can be changed
Seller guarantees normal equipment functioning during 12 months since the date of shipment from the seller’s warehouse.
We are looking forward to mutually beneficial cooperation!
The offer is valid for 14 days!